USBwave12 Technical Data

PERFORMANCE
Maximum Output Rate	Sine : 0 — 12MHz Square : 0 — 5MHz Triangle : 0 — 1 MHz
Frequency Resolution	186mHz
Programmable Amplitude	0 to +/- 10V (pk-pk)
Amplitude Resolution	40mV
Programmable Offset	0 to +/- 10V
Offset Resolution	80mV
Programmable Phase	0 — 360 degrees
Phase Resolution	0.8789 degrees
Output Impedance	50 Ohms
Number of Channels	1 per module, modules can be stacked together to give up to 4 channels
Output Modes	Normal Output High-Z, leakage current typ 1uA
Master Clock	12.5MHz
Master Clock Skew	2 or more stacked units typically 2ns
Short Circuit Protection	1 minute max
Number of Channels	1 per module, modules can be stacked together to give up to 4 channels
POWER
Requirements	5V +/- 10% supplied from USB Host
Power Consumption	300mA, 1 Watt
PHYSICAL
Interface	USB v1.1 Full Speed 12 MBits/sec, USB2.0 compatible
Housing Size	75mm x 30mm x 18mm
Mass	42g
Stacking	Up to 4 channels
SOFTWARE
Requirements	Win98SE/ME/2000/XP
Recommended	Pentium 600MHz or better, 256 RAM, 800x600 screen resolution

More Information